Company registered VAT No. 625 3738 34

Copyright © 2006 Practice Care Maintenance Services Ltd All rights reserved.
Reproduction in whole or part in any form or medium without express written permission of PCMS LTD is prohibited

• Easy to use
• Provides fast information on
  contamination, degradation,
  and equipment wear
• Helps you make timely
  decisions about lubricant
  problems

Introduction
Because fast answers are often critical to your maintenance needs, the OilView® in-shop oil analysis system provides useful and fast results to help you solve lubricant related problems quickly. The OilView® Quick-Check Analyzer is easy to use. Test results are available in 1 minute and are easily interpreted. The knowledge you gain quickly translates to longer equipment life and condition based intervals between oil changes. With the OilView® Quick- Check, your staff develops valuable in-house experience and saves time and money. OilView® helps you make informed decisions by providing data in three critical categories: oil degradation, oil contamination, and machine wear. Data management capabilities such as reporting and trending are available with included PC software. A PC is not required to perform tests.

The OilView® Quick-Check Analyzer includes:

• Oil Analyzer
• 1 Oil Sensor Grid
• Oil Sample Pump
• Carrying Case
• 1 year warranty on hardware
• One set of calibration
  fluids, A and B
• Communication Cable
• PC software (not required for operation)
  Operation and Storage
  Sample Volume: 30ml minimum
  Test Time: 1 minute (dilution required)
  Viscosity: All oils
  Lube Types: All mineral oils and
  synthetics
  Cleaning: Wipe with absorbent tissues
  Calibration: Performed onsite by user
  each day of use
  Temperature: 32-120° F (0-50° C)
  Operating: Temperature constant within
  +/- 5° F (3° C)

Technical Specifications Physical Dimensions

Depth: 8.3 in. (212 cm)
Height: 2.6 in. (65 cm)
Width: 12.75 in. (325 cm)
Weight: 6.10 lbs (2.87 kg)
Power Supply
110 to 240 VAC Universal IEC Input 50 or 60 Hz.
Interface
- 2 x 16 character LCD
- 9-pin sub-D cable to IBM PC-compatible
computers via RS-232C interface (cable provided
with unit)
Measurements:
Dielectric: Compare with dielectric of clean oil to determine
lube degradation
Ferrous Index: Ferrous particles > 5 microns
Large Ferrous Indication: Ferrous particles
>> 60 microns
Large non-Ferrous Indication: Non-ferrous
particles >> 60 microns
Droplet Indication: Free water droplets
Water: Water estimate